--- © 2015 Sigmacom Broadcast - www.sigmacom.gr - info@sigmacom.gr
--- SNMP V1

	SIGMACOM-ETHERMPX-MIB DEFINITIONS ::= BEGIN
 
		IMPORTS
			OBJECT-TYPE			
				FROM RFC-1212			
			TRAP-TYPE			
				FROM RFC-1215			
			enterprises, IpAddress, Gauge			
				FROM RFC1155-SMI;
	
	
--
-- Node definitions
--
	
		-- 1.3.6.1.4.1.44467
		sigmacom OBJECT IDENTIFIER ::= { enterprises 44467 }

		
		-- 1.3.6.1.4.1.44467.1
		etherMPX OBJECT IDENTIFIER ::= { sigmacom 1 }

		
		-- 1.3.6.1.4.1.44467.1.1
		sysAudioAttenuation OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"Decoder analog output attenuation. Range=255-14, step=1, attenuation(dB)=255-(value*0,5)."  
			::= { etherMPX 1 }

		
		-- 1.3.6.1.4.1.44467.1.2
		sysAudioBufferSize OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"Decoder audio buffer. Range=1-24, step=1, latency(mS)=value*2,5. If LowLatencyOption, Range=1-58, step=1, latency(mS)=value*1,25"  
			::= { etherMPX 2 }

		
		-- 1.3.6.1.4.1.44467.1.3
		sysAudioFramesRxErr OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
        	"Ethernet frames with audio payload, but dropped by the device (possible causes: CRC errors, internal underrun / overrun, network collisions). Auto reset to zero when reaches value=268.435.456."
			::= { etherMPX 3 }

		
		-- 1.3.6.1.4.1.44467.1.4
		sysAudioFramesRxOk OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
        	"Ethernet frames with audio payload that received OK. Auto reset to zero when reaches value=268.435.456."
			::= { etherMPX 4 }

		
		-- 1.3.6.1.4.1.44467.1.5
		sysAudioFramesTxErr OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
        	"Ethernet frames with audio payload, but dropped by the device (possible causes: CRC errors, internal underrun / overrun, network collisions). Auto reset to zero when reaches value=268.435.456."
			::= { etherMPX 5 }

		
		-- 1.3.6.1.4.1.44467.1.6
		sysAudioFramesTxOk OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
        	"Ethernet frames with audio payload that transmitted OK. Auto reset to zero when reaches value=268.435.456."
			::= { etherMPX 6 }

		
		-- 1.3.6.1.4.1.44467.1.7
		sysAudioInputPort OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"Audio input interface of Encoder. Value=0(Digital), Value=1(Analog)."
			::= { etherMPX 7 }
			
			
		-- 1.3.6.1.4.1.44467.1.8
		sysAudioInputType OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"Audio type to be transmitted. Must be the same in both Encoder and Decoder. Value=0(L/R), Value=1(MPX)."
			::= { etherMPX 8 }			


		-- 1.3.6.1.4.1.44467.1.9
		sysLowLatencyOptionEnabled OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"Enable or disable Low Latency Option. Must be the same in both Encoder and Decoder. Value=0(Disable), Value=1(Enable)."
			::= { etherMPX 9 }			

		-- 1.3.6.1.4.1.44467.1.10
		sysMulticastIp OBJECT-TYPE
			SYNTAX IpAddress
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"Definition of multicast IP for audio packets. Must be the same in both Encoder and Decoder."
			::= { etherMPX 10 }			
			
		-- 1.3.6.1.4.1.44467.1.11
		sysRemoteIp OBJECT-TYPE
			SYNTAX IpAddress
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"Define in Encoder the IP address of target Decoder (used only for multicast transmission)."
			::= { etherMPX 11 }			

			
		-- 1.3.6.1.4.1.44467.1.12
		sysStreamingType OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"Define in Encoder the transmission type. Value=0(Unicast), value=1(Multicast)."
			::= { etherMPX 12 }			
			
		-- 1.3.6.1.4.1.44467.1.13
		sysGateway OBJECT-TYPE
			SYNTAX IpAddress
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"Define the IP gateway of the Audio_ETH interface."
			::= { etherMPX 13 }			
			
		-- 1.3.6.1.4.1.44467.1.14
		sysIpAddress OBJECT-TYPE
			SYNTAX IpAddress
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"Define the IP address of the Audio_ETH interface."
			::= { etherMPX 14 }			
			

		-- 1.3.6.1.4.1.44467.1.15
		sysMacAddress OBJECT-TYPE
			SYNTAX OCTET STRING
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
        	"Display the MAC address of the Audio_ETH interface."
			::= { etherMPX 15 }

		-- 1.3.6.1.4.1.44467.1.16
		sysRxFramesErr OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
        	"Ethernet frames received, but dropped by the device (possible causes: CRC errors, internal underrun / overrun, network collisions). Auto reset to zero when reaches value=268.435.456."
			::= { etherMPX 16 }

		
		-- 1.3.6.1.4.1.44467.1.17
		sysRxFramesOk OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
        	"Ethernet frames received OK from the device (no CRC errors, no underruns / overruns, no network collisions). Auto reset to zero when reaches value=268.435.456."
			::= { etherMPX 17 }

		
		-- 1.3.6.1.4.1.44467.1.18
		sysSubnetMask OBJECT-TYPE
			SYNTAX IpAddress
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"Define the IP subnet mask of the Audio_ETH interface."
			::= { etherMPX 18 }

		
		-- 1.3.6.1.4.1.44467.1.19
		sysTxFramesErr OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
        	"Ethernet frames that failed to be transmitted from the device (possible causes: internal underrun / overrun, or network collisions). Auto reset to zero when reaches value=268.435.456."
			::= { etherMPX 19 }

		
		-- 1.3.6.1.4.1.44467.1.20
		sysTxFramesOk OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
        	"Ethernet frames transmitted OK from the device (no internal underruns / overruns, network collisions). Auto reset to zero when reaches value=268.435.456."
			::= { etherMPX 20 }

		
		-- 1.3.6.1.4.1.44467.1.21
		sfnFramesErr OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
        	"Decoder only: number of PTP SYNC messages received, but rejected by the EtherMPX algorithms. Possible causes: glitching Master Clock, heavy loaded network, many irrelevant Ethernet packets that must be filtered out. Auto reset to zero when reaches value=268.435.456."
			::= { etherMPX 21 }

		
		-- 1.3.6.1.4.1.44467.1.22
		sfnFramesMismatch OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
        	"Decoder only: the measured mismatch between the Master Clock and the local clock, expressed in nanoseconds (nS). This value must be as low as possible to indicate that there is a good sync with the Master Clock."
			::= { etherMPX 22 }
			
			
		-- 1.3.6.1.4.1.44467.1.23
		sfnFramesOk OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
        	"Decoder only: number of SYNC messages received OK and took into account by the EtherMPX algorithms to calculate and calibrate on-the-fly the sync parameters. Auto reset to zero when reaches value=268.435.456."
			::= { etherMPX 23 }			


		-- 1.3.6.1.4.1.44467.1.24
		sfnLatencyAvg OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
        	"Decoder only: a 2-samples rolling average value of the measured latency towards the Encoder, since last counter reset."
			::= { etherMPX 24 }			

		-- 1.3.6.1.4.1.44467.1.25
		sfnLatencyMax OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
        	"Decoder only: The highest measured latency towards the Encoder, since last counter reset."
			::= { etherMPX 25 }			
			
		-- 1.3.6.1.4.1.44467.1.26
		sfnLatencyMin OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
        	"Decoder only: The lowest measured latency towards the Encoder, since last counter reset."
			::= { etherMPX 26 }			

			
		-- 1.3.6.1.4.1.44467.1.27
		sfnLatencyNow OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
        	"Decoder only: The network latency as measured between local device and Master Clock device. Updated every 30 sec."
			::= { etherMPX 27 }			
			
		-- 1.3.6.1.4.1.44467.1.28
		sfnAutoLatency OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"Decoder only: Auto compensate measured latency. Not recommended without PTP-aware network elements. Value=0(Disable), value=1(Enable)."
			::= { etherMPX 28 }			
			
		-- 1.3.6.1.4.1.44467.1.29
		sfnClockSelection OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"Encoder only: Select internal TCXO or external 10MHz clock source. Use with extreme caution, see User Manual. Value=0(Internal), value=1(External)."
			::= { etherMPX 29 }			
			

		-- 1.3.6.1.4.1.44467.1.30
		sfnOptionEnabled OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"Enable or disable SFN Option. Must be the same in both Encoder and Decoder. Value=0(Disable), Value=1(Enable)."
			::= { etherMPX 30 }


		-- 1.3.6.1.4.1.44467.1.31
		sfnUserLatency OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"Decoder only: user defined latency compensation with 100nS steps. Range 0-25000, step=1, latency(nS)=value*100."
			::= { etherMPX 31 }

		
		-- 1.3.6.1.4.1.44467.1.32
		sysSilenceDetectorMode OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"Operational mode of Silence Detector engine in Decoder. Value=0(Auto detect), value=1(Force internal), value=2(Force external)."
			::= { etherMPX 32 }

		
		-- 1.3.6.1.4.1.44467.1.33
		sysSilenceDetectorThreshold OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"Lowest audio level threshold that triggers countdown timer. Range=1-154, step=1, level(dBu)=56-(Log10(value*2.0487)*20))."
			::= { etherMPX 33 }

		
		-- 1.3.6.1.4.1.44467.1.34
		sysSilenceDetectorTimeout OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"Initial value of countdown timer in Decoder, before switching to AUX input. Range=1-220, step=1, time(Sec)=value*0,455."
			::= { etherMPX 34 }

		
		-- 1.3.6.1.4.1.44467.1.35
		sysDeviceName OBJECT-TYPE
			SYNTAX OCTET STRING (SIZE(16))
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"Device name (Fixed size is 16 characters)."
			::= { etherMPX 35 }

		
		-- 1.3.6.1.4.1.44467.1.36
		sysDspVersionMajor OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
        	"Display major version of DSP software."
			::= { etherMPX 36 }

		
		-- 1.3.6.1.4.1.44467.1.37
		sysDspVersionRevision OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
        	"Display revision of DSP software."
			::= { etherMPX 37 }
			
			
		-- 1.3.6.1.4.1.44467.1.38
		sysSerialNumber OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
        	"Device serial number."
			::= { etherMPX 38 }			
				
		-- 1.3.6.1.4.1.44467.1.39
		snmpManagerIP OBJECT-TYPE
			SYNTAX IpAddress
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"IP address of the SNMP manager that receives SNMP traps."
			::= { etherMPX 39 }			


		-- 1.3.6.1.4.1.44467.1.40
		snmpReadOnlyComString OBJECT-TYPE
			SYNTAX OCTET STRING (SIZE(8))
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"Read-Only Community String. Default is 'sigmacom'. Fixed size is 8 characters"
			::= { etherMPX 40 }	

		-- 1.3.6.1.4.1.44467.1.41
		snmpReadWriteComString OBJECT-TYPE
			SYNTAX OCTET STRING (SIZE(8))
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"Read-Write Community String. Default is 'ethermpx'. Fixed size is 8 characters"
			::= { etherMPX 41 }							

							
		-- 1.3.6.1.4.1.44467.1.42
		snmpAgentMask OBJECT-TYPE
			SYNTAX IpAddress
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
        	"IP subnet mask of the Management_ETH interface."
			::= { etherMPX 42 }	
			
		-- 1.3.6.1.4.1.44467.1.43
		snmpAgentGW OBJECT-TYPE
			SYNTAX IpAddress
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
        	"IP gateway of the Management_ETH interface."
			::= { etherMPX 43 }	
			
		-- 1.3.6.1.4.1.44467.1.44
		snmpAgentIP OBJECT-TYPE
			SYNTAX IpAddress
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
        	"IP address of the Management_ETH interface."
			::= { etherMPX 44 }	

		-- 1.3.6.1.4.1.44467.1.45
		snmpAgentDNS OBJECT-TYPE
			SYNTAX IpAddress
			ACCESS read-only
			STATUS mandatory
			DESCRIPTION
        	"DNS server for the Management_ETH interface."
			::= { etherMPX 45 }				
				

		-- 1.3.6.1.4.1.44467.1.46
		snmpNewAgentMask OBJECT-TYPE
			SYNTAX IpAddress
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"New IP subnet mask of the Management_ETH interface."
			::= { etherMPX 46 }	
			
		-- 1.3.6.1.4.1.44467.1.47
		snmpNewAgentGW OBJECT-TYPE
			SYNTAX IpAddress
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"New IP gateway of the Management_ETH interface."
			::= { etherMPX 47 }	
			
		-- 1.3.6.1.4.1.44467.1.48
		snmpNewAgentIP OBJECT-TYPE
			SYNTAX IpAddress
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"New IP address of the Management_ETH interface."
			::= { etherMPX 48 }	

		-- 1.3.6.1.4.1.44467.1.49
		snmpNewAgentDNS OBJECT-TYPE
			SYNTAX IpAddress
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"New DNS server for the Management_ETH interface."
			::= { etherMPX 49 }				
				

		-- 1.3.6.1.4.1.44467.1.50
		snmpSetSettings OBJECT-TYPE
			SYNTAX Gauge
			ACCESS read-write
			STATUS mandatory
			DESCRIPTION
        	"IP assignment method.  0=DHCP, 1=STATIC. If STATIC is applied then snmp 'New' variables will be activated"
			::= { etherMPX 50 }				


--
-- Trap definitions
--
	
		silenceDetectorActivated TRAP-TYPE 
			ENTERPRISE etherMPX
			::=  1

	
	END